Jump to content

  • P0180 Fuel Injection Pump Temp Out Of Range

       (0 reviews)
    Mopar1973Man

    By Mopar1973Man

     Share

    DTC P0180: FUEL INJECTION PUMP TEMP OUT OF RANGE

    Monitor & Set Conditions

    Fuel injection pump temperature is monitored when the engine is running. DTC will set if fuel temperature is out of normal pump operating range.

    Possible Causes

    • Injection Pump - Engine Running
    • Injection Pump - Engine Off

    Testing

    1. Turn ignition on with engine off. Using DRBIII(R) scan tool, clear engine DTCs. Start engine and allow the engine to idle for one minute. Using scan tool, check for engine DTCs. If DTC P0180 does not exist, go to next step. If DTC P0180 exists, replace fuel injection pump. See appropriate REMOVAL, OVERHAUL & INSTALLATION article.

    2. Turn ignition off. Turn ignition on with engine off. Using scan tool, clear engine DTCs. Check for engine DTCs with ignition on and engine off. If DTC P0180 exists, replace fuel injection pump. See appropriate REMOVAL, OVERHAUL & INSTALLATION article. If DTC P0180 does not exist, the test is complete.

     Share
    Go to Cummins articles

    User Feedback

    There are no reviews to display.


Rate The Author

Please take the time and give the author a 1 to a 5-star rating for the information you have gained from anywhere on the website. All forum threads, articles, etc. If a members post is good information please don't forget to tell them "Thanks" or "Like"

Rate Us On Google

Please take the time and visit our Google Review page and give us a review of our services.

Tip Jar

If Mopar1973Man.Com has helped you with quick and timely information for your repair please consider tossing a tip in the Tip Jar

×
×
  • Create New...