Jump to content

  • P0106 Inlet Air Pressure Sensor Rationality

       (0 reviews)
    Mopar1973Man

    By Mopar1973Man

     Share

    P0106 INLET AIR PRESSURE SENSOR RATIONALITY

    When Monitored and Set Condition:

    When Monitored: When the ignition is on.
    Set Condition: The Inlet air pressure is above a calibrated threshold.

    POSSIBLE CAUSES

    • INLET AIR PRESSURE SENSOR
    • INTERMITTENT CONDITION
    • TROUBLESHOOT OTHER DTC'S FIRST

    DIAGNOSTIC PROCEDURE

    NOTE: Refer to VERIFICATION TESTS for appropriate verification test procedures.Using the DRBIII®, check for additional DTC's.

    1. Do you have any other air pressure related DTC's?
      Yes --> Troubleshoot other DTC's First. Perform POWERTRAIN VERIFICATION TEST VER - 1 (DIESEL).
      No --> Go To 2
    2. Using the DRBIII®, monitor the Inlet air pressure sensor values. Do the readings on the DRBIII® fluctuate slightly?
      Yes --> Refer to the SYMPTOM: INTERMITTENT CONDITION Symptom (Diagnostic Procedure). Perform POWERTRAIN VERIFICATION TEST VER - 1 (DIESEL).
      No --> Replace the Inlet Air Temperature/ Pressure sensor. Perform POWERTRAIN VERIFICATION TEST VER - 1 (DIESEL).
     Share
    Go to Cummins articles

    User Feedback

    There are no reviews to display.


Rate The Author

Please take the time and give the author a 1 to a 5-star rating for the information you have gained from anywhere on the website. All forum threads, articles, etc. If a members post is good information please don't forget to tell them "Thanks" or "Like"

Rate Us On Google

Please take the time and visit our Google Review page and give us a review of our services.

Tip Jar

If Mopar1973Man.Com has helped you with quick and timely information for your repair please consider tossing a tip in the Tip Jar

×
×
  • Create New...