Jump to content
  • P0219 Crankshaft Position Sensor Over Speed Signal

       (0 reviews)

    Mopar1973Man

    P0219 CRANKSHAFT POSITION SENSOR OVER SPEED SIGNAL

    When Monitored and Set Condition:

    When Monitored: While the engine is running.
    Set Condition: The ECM detects engine speed is above a calibrated threshold.

    POSSIBLE CAUSES

    • OTHER DTC'S
    • MECHANICAL OVERSPEED OF ENGINE
    • INTERMITTENT CONDITION

    DIAGNOSTIC PROCEDURE

    NOTE: Refer to VERIFICATION TESTS for appropriate verification test procedures.

    1. Turn the ignition on. With the DRBIII®, read and record the freeze frame data. With the DRBIII®, read the Engine DTC's. Is there other Crankshaft position sensor DTC's set?
      Yes --> Refer to symptom list for problems related to the other Crankshaft position sensor DTC's.
      No --> Go To 2
    2. Visually inspect the engine for signs of mechanical overspeed. Such as, bent push rod, broken rocker arms, bent valves, etc. Did you notice any overspeed damage?
      Yes --> Repair or replace any damaged components.
      No --> Test Complete.

    User Feedback

    There are no reviews to display.


×
×
  • Create New...