Jump to content

  • P0607 ECM Internal Failure

       (0 reviews)
    Mopar1973Man

    By Mopar1973Man

     Share

    P0607 ECM INTERNAL FAILURE

    When Monitored and Set Condition:

    When Monitored: With the key on or engine running
    Set Condition: ECM had detected internal failures.

    POSSIBLE CAUSES

    • ECM

    DIAGNOSTIC PROCEDURE

    1. Turn the ignition on.
      NOTE: This DTC is caused by an internal Engine Control Module failure. Repairs are not possible to the ECM.
      Is the DTC P0606 set?
      Yes --> Replace and program the ECM in accordance with the Service Information. Perform POWERTRAIN VERIFICATION TEST VER - 1 (DIESEL).
      No --> Test Complete.
     Share
    Go to Cummins articles

    User Feedback

    There are no reviews to display.


Rate The Author

Please take the time and give the author a 1 to a 5-star rating for the information you have gained from anywhere on the website. All forum threads, articles, etc. If a members post is good information please don't forget to tell them "Thanks" or "Like"

Rate Us On Google

Please take the time and visit our Google Review page and give us a review of our services.

Tip Jar

If Mopar1973Man.Com has helped you with quick and timely information for your repair please consider tossing a tip in the Tip Jar

×
×
  • Create New...