Jump to content

  • P0630 VIN Not Entered Error

       (0 reviews)
    Mopar1973Man

    By Mopar1973Man

     Share

    P0630 VIN NOT ENTERED ERROR

    When Monitored and Set Condition:

    When Monitored: While the key is on.
    Set Condition: The VIN was not calibrated into the ECM.

    POSSIBLE CAUSES

    • VIN NOT CALIBRATED INTO ECM

    DIAGNOSTIC PROCEDURE

    1. Using the DRBIII®, recalibrate the ECM with the proper VIN. Did the DTC P0630 reset?
      Yes --> Replace the ECM. Perform POWERTRAIN VERIFICATION TEST VER - 1 (DIESEL).
      No --> Test Complete.
     Share
    Go to Cummins articles

    User Feedback

    There are no reviews to display.


Rate The Author

Please take the time and give the author a 1 to a 5-star rating for the information you have gained from anywhere on the website. All forum threads, articles, etc. If a members post is good information please don't forget to tell them "Thanks" or "Like"

Rate Us On Google

Please take the time and visit our Google Review page and give us a review of our services.

Tip Jar

If Mopar1973Man.Com has helped you with quick and timely information for your repair please consider tossing a tip in the Tip Jar

×
×
  • Create New...