Search the Community
Showing results for tags 'ground'.
-
Hey guys, so here's my problem. Bought an 03 dodge 2500 24v Cummins. Well I'm chasing it's demons now. Clear the codes and pull new, I get open circuit bank 2 injectors 4-6. I had a misfire on 6 so I replaced the injector (mechanical fail and the injector in it wasn't for the 03-4.5) also replaced the injector harness on #6 since it didn't ohm to spec) still hearing the thump/tick. Second code p2509 I believe, the intermittent power to ecm/pcm. I start checking grounds (I have tested the ecm harness to ecm and harness to b+ and b-, all checked out. So I'm chasing grounds but have had zero luck finding a schematic of grounding wires (have found a ground to cab that was broken) found three grounds on the driver side and nodda on the passenger side. Anywho can anyone help a girl out? Wish it was a 12v I'm tempted to do a swap at this point.
-
I have read here about the ground above the atarter for the ecm. will running a new ground from the battery to the ecm serve the same purpose or does the ground above the starter serve a greater purpose than just the ecm?
Rate The Author
Please take the time and give the author a 1 to a 5-star rating for the information you have gained from anywhere on the website. All forum threads, articles, etc. If a members post is good information please don't forget to tell them "Thanks" or "Like"
Rate Us On Google
Please take the time and visit our Google Review page and give us a review of our services.
Tip Jar
If Mopar1973Man.Com has helped you with quick and timely information for your repair please consider tossing a tip in the Tip Jar