moisture from lower vent

[Mopar1973Man]

Looks like you coolant change are not often enough. Seeing this just tells me the coolant turned corrosive and ate the heater core. I would make sure to change coolant and flush the system out.

Edited December 21, 2015 by Mopar1973Man

[John T]

yup, guilty. i have a garden hose attachment for my heater hoses.... should i remove my thermostat during the flush?

[Mopar1973Man]

Personally... I pull the upper hose, thermostat, and then reinstall just the thermostat housing. Turn a garden hose on high and stick in the radiator. Then start the truck and allow it to pump till clear. I typically stab the throttle a few times to surge water through everything.

[John T]

ok, thanks . Ill let you know how it all goes

[John T]

ok, im all recored , flushed and refilled. all seems good again. I did have to regalia the plastic nuts at the front of the dash.

(Gorilla construction adhesive)

But.... i have 2 screws left over. I wouldn't normally worry about 2 screws but they look kinda important.

Anybody recognize these?

 

Edited December 25, 2015 by John T

[Mopar1973Man]

Kick panel bolts? One driver side and one passenger side.

Center support bolts? There are 2 bolts and 2 nuts here too...

 

 

[John T]

regalia the plastic nuts?.... i have no idea what that means, but i meant to say reglue. darn autocorrect