Jump to content
  • Welcome To Mopar1973Man.Com LLC

    We are a privately owned support forum for the Dodge Ram Cummins Diesels. All information is free to read for everyone. To interact or ask questions you must have a subscription plan to enable all other features beyond reading. Please go over to the Subscription Page and pick out a plan that fits you best. At any time you wish to cancel the subscription please go back over to the Subscription Page and hit the Cancel button and your subscription will be stopped. All subscriptions are auto-renewing. 

Installed 19.5's on the Pimp Truck


Recommended Posts

2 hours ago, Mopar1973Man said:

Fix the failed speed sensor or bad tone ring. Every time you turn the key off your resetting the light. If the problem still exist then the light is turned on. Typically a bad speed sensor or failed tone ring like my last failure was.

 

 

 

 

Is that under the hood close to the battery and fuse box ?

Link to comment
Share on other sites

  • Owner
19 minutes ago, Dieselfuture said:

@Mopar1973Man I just changed my front wheel bearings and have a few years old sensor in rear end and my brake/abs light is back again after 2 weeks of no light, after front hub assemblys replaced. Not sure what to think now, kinda tired of it at the moment. 

 

You might have to get a OBDII tool that can report the ABS wheel speeds. Then monitor the wheel speeds while you drive then whichever wheel is dropping to zero could be a bad sensor or bad hub. Like mine the bearing was fine but the tone ring broke loose. 

  • Thanks 1
Link to comment
Share on other sites

×
×
  • Create New...