Jump to content
  • Welcome Guest To Mopar1973Man.Com

    We are a Dodge Ram Cummins Turbo Diesel forum. We are very friendly and helpful group of Dodge Ram Cummins owners. We will try to keep your truck running the best we can and provide information for diagnostics, repairs and even guide you on the best replacement parts to use. 


    Registration is free. Registering on the site will provide access to many more things like...

    • Contribute to the Forum being able to ask questions and get support for your Dodge Ram Cummins.
    • Contribute to Article Database adding your ideas and suggestions.
    • Classified Ads posted by the members. Post up your used parts and vehicles.
    • Member Garage where you can proudly display your vehicles and modifications that you have done to them.
    • Download files, documents, and Quadzilla Adrenaline tunes for your truck.
    • 911 Support Network. We've got a group of members will to aid you if your truck breaks down on the road.
    • Reduced Advertisements displayed to you.


Trailer Charge line

Recommended Posts

I just purchased my first trailer that will need a charge line ( my last two had solar and 110 ac charging) and I noticed that the charge line in my truck has no relay that I can find. This concerns me because if the grids turn on they will pull current from the batteries including the trailer when plugged in. Being that the grids pull 100 amps each and the alternator will not even supply what is needed for one grid at idle. I my have heard wrong but I heard that our trucks had one just for this reason and so you cant draw from the truck batteries when parked and draining them down. I found the relay for the clearance / running lights but none for the charge line. Has anyone pulling a travel trailer had any problem with this or is there a relay I missed. 

Share this post

Link to post
Share on other sites

The trailer power line is a direct connect lead. No relay and is hot all the time. Will not hurt the trailer there is no way for the grid heaters to pull that kind of load back out of the trailer. The line is fused with 40 amp fuse. 


Exterior Lighting (Page 2) wiring map 1999 Dodge Ram

Share this post

Link to post
Share on other sites

If you're not going to do anything fancy...buy some  "7 strand trailer" wire by the foot and junction box like this  https://www.ebay.com/i/272940261668?chn=ps     Wire color is probably same as what your RV has, so already color coded for you.  But double check.


I put in a solenoid or an elec one way check valve as a safe guard because when our old convertor went bad it also took out some 12 volt fuses  Even though blown fuses did their job, I still wanted to make sure any elec damage is confined to RV side if it ever happens again. 


If your going to get fancy and run other things such as 12 volt supply line for other things such as air compressor, charge line for batteries in pick up bed, a charging station for  my Ryobi tools, 12 volt water pump to refill water from creeks or campgrounds with a water hose bib in middle of campground loop.  I ran larger gauge wires allowing for voltage drop.  Especially elec brake line. On my landing leg I come directly off RV battery with 20 amp fuse and added extra wire so I can connect to pick up side if rv batteries are real low.  (Low batteries as in wife runs heater all night) :whistle:

Share this post

Link to post
Share on other sites

Thanks guys. I guess I will be installing a switched charge line. I like the idea of using the 7 strand wire and will start looking for it. I was thinking about a 3 wire cable but 7 wire sounds better because I want to run a larger brake wire also. It may be newer trucks that have the switched line.

Share this post

Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now