Jump to content
  • Welcome To Mopar1973Man.Com LLC

    We are a privately owned support forum for the Dodge Ram Cummins Diesels. All information is free to read for everyone. To interact or ask questions you must have a subscription plan to enable all other features beyond reading. Please go over to the Subscription Page and pick out a plan that fits you best. At any time you wish to cancel the subscription please go back over to the Subscription Page and hit the Cancel button and your subscription will be stopped. All subscriptions are auto-renewing. 

12 Ram 2500 no start!!!!


mrtowman4u

Recommended Posts

  • Owner

Crazy idea... I'm reaching here... How about alternator test for AC noise and possible ECM issues because of AC noise damage? Yes you can pull the alternator and have it tested but it might give a clue to if the ECM possible was damaged by excessive AC noise. I've now had one report that proves that AC noise is possible on newer trucks. 

Link to comment
Share on other sites

  • 3 weeks later...

You said you took the fuel supply line off the pump?  There are 3 lines to the cp3.   A banjo bolt, a quick disconnect and a steel line that you need a wrench for.   Which line is it your referring to?

 

You said the banjo bolt had minimal flow??   That is the pump return and minimal flow might be normal.

Link to comment
Share on other sites

×
×
  • Create New...