Jump to content
  • Welcome Guest To Mopar1973Man.Com

    We are a Dodge Ram Cummins Turbo Diesel forum. We are very friendly and helpful group of Dodge Ram Cummins owners. We will try to keep your truck running the best we can and provide information for diagnostics, repairs and even guide you on the best replacement parts to use. 


    Registration is free. Registering on the site will provide access to many more things like...

    • Contribute to the Forum being able to ask questions and get support for your Dodge Ram Cummins.
    • Contribute to Article Database adding your ideas and suggestions.
    • Classified Ads posted by the members. Post up your used parts and vehicles.
    • Member Garage where you can proudly display your vehicles and modifications that you have done to them.
    • Download files, documents, and Quadzilla Adrenaline tunes for your truck.
    • 911 Support Network. We've got a group of members will to aid you if your truck breaks down on the road.
    • Reduced Advertisements displayed to you.


Blue Top Steering Rebuild

Recommended Posts

Posted (edited)

I'm going to kick this off with a rebuild thread here. Ryan @Blue-Top Steering was nice enough to set me up with the seal kit for my steering box. 


The only tool I had to borrow was a pitman arm puller. First thing I did was tie the steering wheel to the seat base in the center position. This is to protect the clock spring more than anything. Next I pulled the pitman arm nut and lock washer. Slipped the pitman arm over and using a 1/2 drive ratchet pulled a good load of pressure on it and smack the pitman arm a bit with a hammer to free it. Pulled a bit more and off it came. Then moved up to the 13mm socket and wobble head ratchet and spun the pinch bolt out. Wiggle the coupler and steering shaft came right off. Next was reaching up with a 3/4" wrench and pulled the power steering hoses. Make sure to have a catch bucket it will drain the system. Mine had a bit of a foul smell might be time for another flush which most of the system will be emptied. That left me the 3 bolts holding the steering gearbox on the frame.




So in a timely manner, Blue Top's seal kit shows up today. The only thing I had changed up is the input shaft seal could one of two different designs. I had Ryan supply both seals.



To be continued on my next day at home. 

Edited by Mopar1973Man

Share this post

Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now