Jump to content
  • Welcome Guest To Mopar1973Man.Com

    We are a Dodge Ram Cummins Turbo Diesel forum. We are very friendly and helpful group of Dodge Ram Cummins owners. We will try to keep your truck running the best we can and provide information for diagnostics, repairs and even guide you on the best replacement parts to use. 

     

    Registration is free. Registering on the site will provide access to many more things like...
     

    • Contribute to the Forum being able to ask questions and get support for your Dodge Ram Cummins.
    • Contribute to Article Database adding your ideas and suggestions.
    • Classified Ads posted by the members. Post up your used parts and vehicles.
    • Member Garage where you can proudly display your vehicles and modifications that you have done to them.
    • Download files, documents, and Quadzilla Adrenaline tunes for your truck.
    • 911 Support Network. We've got a group of members will to aid you if your truck breaks down on the road.
    • Reduced Advertisements displayed to you.

SIlver_Bullet1997

Ken Morton please make me a graph

Recommended Posts

What injectors do you have?  Your truck is working REALLY hard to keep speed.   I am gonna guess your injectors are worn / junk / tiny for your air.

 

Capture.JPG

 

What injectors?

What Turbo, full specs?

 

 

I can also see that your light throttle limit is %30, but you are cruising typically at up to %40 load.   So you are not getting the timing you are needing at cruise state either.  I would bump up your light throttle limit. 

Have you tested for boost leaks?   at 2k rpm I would expect more boost unless your exhaust housing is big.

 

 

Share this post


Link to post
Share on other sites

Hey, sorry late reply but I had a boost leak that I found today. This should be a better graph for you to make and get better results. This is my Daily tune I use driving empty. There are a couple full throttle pulls and some cruising as well. My turbo is a 63/68/12, with 7x.010 sac injectors. I’m running a leveling kit with 33x12.50x20 mt’s and 20x12 wheels

iQuad-2018-04-30-08.26.32.csv

@Me78569

Share this post


Link to post
Share on other sites

What gear ratio? 3.55 or 4.10?

 

Automatic or Manual (5 or 6 speed)?

 

These make a difference in your tuning too. Because final ratio to the ground will be what you are working against. Optimally you want 3.55 to 3.73 ratio to the ground. Roughly speaking your final ratio to the ground is 3.38:1 with 3.55 in the axle... Like I said tires and gears impact the final ratio.

Share this post


Link to post
Share on other sites

Here you go.

 

Increase your light throttle load limit to %40  that will give you a few extra * of timing at cruise and that should drop temps some.  I think something is still up though.  Have you checked your wastegate to make sure it is no opening soon?  your temps are a lot hotter than I would expect.   

 

Capture.JPG

 

 

thoughts @jlbayes?

Share this post


Link to post
Share on other sites

Check it with an air compressor to see when it starts to open.   

 

Did you test for boost leaks?  

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



×