Jump to content
JDHudsn

Digital all in 1 gauge Cluster

Recommended Posts

Posted (edited)

I may be purchasing a 12 valve in the near future that is 100% bone stock with only 60K miles on it. Is there such thing as an all-in-one LCD display that can display: fuel pressure, boost pressure, oil pressure, radiator temp, tranny temp, intake air temp, EGT’s, etc? I have a quad on my 24v and it’s really nice having one screen with all my info right there. Any advice would be greatly appreciated!:burnout:

6C603F24-05B6-4343-A016-07515BE7B848.jpeg

03DD5228-95F8-424B-9695-1668B8780E20.jpeg

Edited by JDHudsn

Share this post


Link to post
Share on other sites

Not sure you’ll have that ‘luxury’ on a 12v. You could get electronic gauges but they’ll still take a mechanical reading and use a sender to display data to the gauges. 

 

Thats a great find btw, I’m jealous!

  • Thanks 1

Share this post


Link to post
Share on other sites
Posted (edited)

What year? OBD link has custom gauge capabilities if 1996 or newer. Not sure about oil press or trans temp though. Depends what sensors a 12V has to read from.

Edited by dave110
  • Thanks 1

Share this post


Link to post
Share on other sites
13 minutes ago, dave110 said:

What year? OBD link has custom gauge capabilities if 1996 or newer. Not sure about oil press or trans temp though. Depends what sensors a 12V has to read from.

@dave110 the truck is a 97 so that might be exactly what I am looking for! I figured with all the new technology out there there had to be something out there!

Share this post


Link to post
Share on other sites
24 minutes ago, dave110 said:

What year? OBD link has custom gauge capabilities if 1996 or newer. Not sure about oil press or trans temp though. Depends what sensors a 12V has to read from.

 

1996 to 1998 12V truck have very limited info. I think TPS, speed, coolant temp, Tach and volts is about it. It was a mechanical engine. This is why in 1998.5 the VP44 was released and P-pump was replaced. The OBDII law required that the truck to have more data present at the port so electronics and computer began right here.

 

  • Thanks 1

Share this post


Link to post
Share on other sites
9 minutes ago, Mopar1973Man said:

 

1996 to 1998 12V truck have very limited info. I think TPS, speed, coolant temp, Tach and volts is about it. It was a mechanical engine. This is why in 1998.5 the VP44 was released and P-pump was replaced. The OBDII law required that the truck to have more data present at the port so electronics and computer began right here.

 

@Mopar1973Man crap haha I was afraid of that. 

 

Let me put put it this way is there a plug in computer to hook a bunch of 12 volt gauges to all the necessary places that put out a Bluetooth signal that can be localized on a single LCD screen like I have with the Quadzilla? 

 

I may may be OCD but I like having a super clean look and this is what I am after

DAA54533-A633-4BE7-A903-D2FFE9C875B8.jpeg

Share this post


Link to post
Share on other sites

The older trucks don’t have those options. Like Mike stated you’re very limited on what electrical/computer info you’re given because there’s practically neither on the truck. It’s one of the main reasons they’re so sought after.

Share this post


Link to post
Share on other sites

I am having a hard time explaining what I’m after. I don’t want to necessarily plug anything into the truck I am more looking for let’s say a “box” under the hood that has say 5 wires that run from it. For instance, if you want the egt’s, boost, coolant, fuel pressure, intake air temp etc. you take those specific wires and put the sensor in the appropriate spot that sends the signal back to your “box” then your box sends a signal with your information to your monitor in the cab. 

Share this post


Link to post
Share on other sites

How much $$$ do they want for that 12 valve 60k 4x4 ? ?

 

03DD5228-95F8-424B-9695-1668B8780E20.jpeg

Share this post


Link to post
Share on other sites

closest thing is the edge cts screen with all the expansion items, $$ by the time you get all the stuff needed.

  • Thanks 1

Share this post


Link to post
Share on other sites
Posted (edited)
2 hours ago, GSP7 said:

How much $$$ do they want for that 12 valve 60k 4x4 ? ?

 

03DD5228-95F8-424B-9695-1668B8780E20.jpeg

@GSP7 the guy is asking a lot, more than $18K. However, I listed my 99 24v for $20K and I have had multiple people asking to see it. The price of these trucks in Washington, Oregon, California, Utah, Arizona is through the roof. Especially if they have less than 100K on them and are 4x4 5 speeds. 

Edited by JDHudsn
  • Like 3

Share this post


Link to post
Share on other sites

I would have to hit the lotto to make mine look that good again. Not much I can for the mileage but I wear that with pride.

  • Like 2

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



×