Jump to content
  • Welcome To Mopar1973Man.Com

    We can see that your guest and been lurking about. When you register on the Mopar1973Man.Com site you'll be able to interact with all the other members. This is the most friendliest Cummins forum you'll ever join. Take the time right now and  REGISTER  on the Mopar1973Man.Com this will open up many more options and functions on the website. Everyone is very friendly and helpful just ask questions and everyone will help you out the best they can. 

Trombly

Quadzilla not showing boost

Recommended Posts

Have a 1999 2500 Cummins 4x4 auto, installed the quadzilla adrenaline and all was working good then the boost started intermittently dropping out and now shows no boost, wondering if anyone else has run into this?

 

I did back probe the quad and the MAP sensor voltage matches what the snap on scanner is reading as well. Sent the module in already and they said everything is fine and sent it back 

 

Thanks for any help

Share this post


Link to post
Share on other sites
51 minutes ago, Me78569 said:

Have you replaced the map sensor? 

Ya with a cummins sensor

 

Messed with it some more and found the quad would starting reading 1 psi when the actual psi was 16

Share this post


Link to post
Share on other sites
On 10/2/2018 at 8:09 AM, Me78569 said:

It's also in the top section of the Tips and Tricks article

 

 

One more for you: Did the jumper removal and now my quad will randomly drop boost, back probed everything on the MAP side and am not getting any drop out, any suggestions?

Share this post


Link to post
Share on other sites

:popcorn:I have had this on mine as well where it seems like the MAP just loses its signal very briefly every now and then. 

Share this post


Link to post
Share on other sites

looking at the log it shows that boost is falling off to 0 at sub 16 psi points.   when boost is below 16 psi the quad is asking the ecm what bosot pressure is.  

 

My guess is either your map is dying or you have a bad pin in your map harness causing boost to drop out randomly.

Share this post


Link to post
Share on other sites

Alright so after messing with it, I redid the pump tap with the BD stealth cover and have not had problems since.  Hopefully this help someone 

Rock n roll

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.




×
×
  • Create New...