Jump to content

  • Welcome To Mopar1973Man.Com LLC

    We are a privately owned support forum for the Dodge Ram Cummins Diesels. All information is free to read for everyone. To interact or ask questions you must have a subscription plan to enable all other features beyond reading. Please go over to the Subscription Page and pick out a plan that fits you best. At any time you wish to cancel the subscription please go back over to the Subscription Page and hit the Cancel button and your subscription will be stopped. All subscriptions are auto-renewing. 

Wait to start delay

1999 White 24v
 Share

Recommended Posts

GSP7

GSP7

Posted
Posted
5 hours ago, Mopar1973Man said:

 

Make sure to get ahold of @pepsi71ocean and let him know. I need to keep the list up to date.

 

 

 It should be already on his list,,,, It was on there many months ago,

 

I dont know where to find his list on this forum to double check it

 

 

.

Link to comment
Share on other sites
  • 4 weeks later...
buzzman

buzzman

Posted
Posted (edited)

A couple weeks ago I replaced the alternator on my with a brand new one. The WTS comes on normally now, no delay. It's been working fine for two weeks. Hopefully that solved my problem. Happy, happy!

 

About a week ago, I also replaced all the battery cables (2/0), new crimped ends, all ground wires, and used military style battery clamps. This might also help since my original clamps and cables were looking bad. 

 

Much thanks to this forum for the great information it provides.

Buzz

Edited by buzzman
Link to comment
Share on other sites
GSP7

GSP7

Posted
Posted
2 hours ago, buzzman said:

A couple weeks ago I replaced the alternator on my with a brand new one. The WTS comes on normally now, no delay. It's been working fine for two weeks. Hopefully that solved my problem. Happy, happy!

 

About a week ago, I also replaced all the battery cables (2/0), new crimped ends, all ground wires, and used military style battery clamps. This might also help since my original clamps and cables were looking bad. 

 

Much thanks to this forum for the great information it provides.

Buzz

I did all that same thing, except I rebuilt and had tested my alternator.... Then I got a new ECM to remedy the wait to start

 

 

.

Link to comment
Share on other sites
  • Owner
Mopar1973Man

Mopar1973Man

Posted
  • Owner
Posted
On 3/25/2019 at 10:40 AM, buzzman said:

A couple weeks ago I replaced the alternator on my with a brand new one. The WTS comes on normally now, no delay. It's been working fine for two weeks. Hopefully that solved my problem. Happy, happy!

 

About a week ago, I also replaced all the battery cables (2/0), new crimped ends, all ground wires, and used military style battery clamps. This might also help since my original clamps and cables were looking bad. 

 

Much thanks to this forum for the great information it provides.

Buzz

 

Make sure to test for the AC noise level out of the alternator. Then you want to do the W-T ground wire mod. While you there you might do the PCM protection fuse too. 

  • Like 1
Link to comment
Share on other sites
buzzman

buzzman

Posted
Posted

Mopar1973Man,

Thanks for the suggestions. What is the W-T ground wire mod? Some time ago I removed the ground wire from the loom that runs from the passenger side battery across the alternator and re-routed it over the radiator and enclosed it in a metal braided hose. That didn't seem to solve any of the problems. Is that what the W-T ground wire mod is?

 

I don't know what the PCM fuse mod is? Can you enlighten me?

 

I sure hope I'm not hi-jacking this thread too much. Let me know and I'll start a new one if needed.

 

Thanks again,

Buzz

Link to comment
Share on other sites
dripley

dripley

Posted
Posted
15 minutes ago, buzzman said:

Mopar1973Man,

Thanks for the suggestions. What is the W-T ground wire mod? Some time ago I removed the ground wire from the loom that runs from the passenger side battery across the alternator and re-routed it over the radiator and enclosed it in a metal braided hose. That didn't seem to solve any of the problems. Is that what the W-T ground wire mod is?

 

I don't know what the PCM fuse mod is? Can you enlighten me?

 

I sure hope I'm not hi-jacking this thread too much. Let me know and I'll start a new one if needed.

 

Thanks again,

Buzz

 

The original version from WT. He explains it well here. Some folks have hard time getting thru the in depth explanation so @Mopar1973Man shortened it. It is more involved than just moving the ground, but it is easy to do and worth the effort.

 

.

 

 

Link to comment
Share on other sites
  • 3 weeks later...
buzzman

buzzman

Posted
Posted

Well, the WTS light delay issue has returned. Based on the recommendations here, I called ACS, Auto Computer Specialists. I will send my ECM off to them.

 

I also got a P0122 code this time (APPS low voltage). Is that caused by the bad ECM?

 

Thanks,

Buzz

Link to comment
Share on other sites
 Share
Go to topic listing

Rate The Author

Please take the time and give the author a 1 to a 5-star rating for the information you have gained from anywhere on the website. All forum threads, articles, etc. If a members post is good information please don't forget to tell them "Thanks" or "Like"

Rate Us On Google

Please take the time and visit our Google Review page and give us a review of our services.

Tip Jar

If Mopar1973Man.Com has helped you with quick and timely information for your repair please consider tossing a tip in the Tip Jar

×
×
  • Create New...