Jump to content
  • Welcome To Mopar1973Man.Com

    We can see that your guest and been lurking about. When you register on the Mopar1973Man.Com site you'll be able to interact with all the other members. This is the most friendliest Cummins forum you'll ever join. Take the time right now and  REGISTER  on the Mopar1973Man.Com this will open up many more options and functions on the website. Everyone is very friendly and helpful just ask questions and everyone will help you out the best they can. 

Recommended Posts

Is there anyone around Louisville KY that has a Smarty and can turn on my factory high idle? I really do not want to take my truck to any of the dealers around here. 2001 2500.

Share this post


Link to post
Share on other sites

From what I've read high idle only functions when it's like -50 out.

 

No one will be able to turn it on anyways theyd have to put they're truck to stock and put a tune on yours

Share this post


Link to post
Share on other sites

DAP used to rent one by the month and I thought people were doing that very thing with them. Thought that was about the only thing you could change that would stay after returning said truck to srock. The 6 cylinder high idle kicks somewhere around 32* and the 3 cylinder somewhere between 32 and 0. But there are other parameters that have to be met also which I dont remeber.

Share this post


Link to post
Share on other sites

To enable high idle: use a Smarty one time and it automatically enables or go to the dealer and have then enable high idle using the DRBIII tool.

 

6 Cylinder high idle is enabled at 32*F IAT with grid heater running. 

 

3 Cylinder high idle is enabled at 15*F IAT with grid heater running.

Share this post


Link to post
Share on other sites

I will probably rent on from DAP if i can't find anyone local. Wanted to get it turned on so I can install the mopar1973man idle switch. Just figured I'd see if anyone here was local and wanted to make a few $$.

I don't trust the dealers around here. I tried to get a few of them to do a flash on our Grand Caravan. Had service bulletin in my hand. 2 dealers flat out refused to do it. 3rd had me talk to their "best drivability tech". After talking to him i gave up. I really need to find someone with access to a DRB111 that knows what they are doing with it.

Share this post


Link to post
Share on other sites

You cannot use the Smarty to correct speedometer and have that stay after returning to stock program can you?

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Sign in to follow this  



×
×
  • Create New...