Jump to content
  • Welcome To Mopar1973Man.Com

    We can see that your guest and been lurking about. When you register on the Mopar1973Man.Com site you'll be able to interact with all the other members. This is the most friendliest Cummins forum you'll ever join. Take the time right now and  REGISTER  on the Mopar1973Man.Com this will open up many more options and functions on the website. Everyone is very friendly and helpful just ask questions and everyone will help you out the best they can. 

Recommended Posts

Hello new here need some help my truck was driving fine no issues at all I stopped shut truck off for about 20 min then went to start truck to leave and would not start had no fuel at the valve on injector pump so I swapped the lift pump and bled system and truck fired right up drove around for a couple hours parked and went to start truck and same thing no fuel pressure and would not start I did notice the after first replacement of the lift pump Tac was inop any help would be appreciated have limited tools as I’m out of state working thank you in advance

 

00 2500 5.9 4wd automatic 310000miles

Share this post


Link to post
Share on other sites

You need to put a scanner on it and check for codes. Sounds like maybe either the crank or cam sensor is going south on you. I do not remeber whether your 2000 has both or just the cam sensor as my 02. If the ECM is not getting a signal it will not let the engine start. You need to scan it to see whats happening.

Share this post


Link to post
Share on other sites

Thank you I was thinking possible crank sensor I have no access to scanner and can’t drive anywhere to get scanned maybe I’ll just grab one and install and hope for the best 

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.




×
×
  • Create New...