Jump to content
  • Welcome To Mopar1973Man.Com

    We can see you lurking about Mopar1973Man.Com reading articles and reading other member's posts. Are you trying to solve a problem with your Dodge / Ram Turbo Diesel Cummins? We have lots of helpful members and staff on the Mopar1973Man.Com and are willing to give guidance on how to fix or improve your truck. You know when you see good valued information here on Mopar1973Man.Com. We are not corporate owned like many of the other websites out there. Like Cummins Forum (VerticalScope Inc.). Mopar1973Man.Com is entirely privately owned and operated since 2004. Your subscription funds goes towards server maintenance and software maintenance. We happen to be one of the most friendliest and helpful websites for Cummins Owners in the world. Come join us and register and then pick a subscription plan

     

Trans Coolant Line Return Question


Recommended Posts

Hey folks searched on here but didn't find the answer I was looking for, most likely user error.  

 

About to install an auxiliary trans cooler with fan under the bed, mostly for slow 4x4 driving.  I live in Nevada and it gets hot.  I've got a Mishimoto replacement cooler up front.  I drew three hunt tags here in Nevada and with 333K on the clock I want to help it out a bit.

 

I wanted to double check that the return line on the transmission is the rear line as it attaches to the transmission, correct?  #3 in this image.

 

Thanks in advance,

 

Adam

00i49953.jpg.00187d1545593bf7d2f6a0bd0499ff92.jpg

 

Annotation 2020-06-12 144705.jpg

Link to post
Share on other sites

Correct # 3 is the return.

 

when installing the auxiliary cooler under bed, I cut the factory steel return line in the straight area before it 90’s into the transmission, then just loosen fitting on transmission and swing that fitting 180 . Then retighten to get line headed toward the aux. cooler,  gives your new auxiliary cooler lines straight back without unnecessary bends  

Link to post
Share on other sites
3 minutes ago, 01cummins4ever said:

Correct # 3 is the return.

 

when installing the auxiliary cooler under bed, I cut the factory steel return line in the straight area before it 90’s into the transmission, then just loosen fitting on transmission and swing that fitting 180 . Then retighten to get line headed toward the aux. cooler,  gives your new auxiliary cooler lines straight back without unnecessary bends  

Genius!

Link to post
Share on other sites

Archived

This topic is now archived and is closed to further replies.

×
×
  • Create New...