Jump to content
  • Welcome To Mopar1973Man.Com LLC

    We are a privately owned support forum for the Dodge Ram Cummins Diesels. All information is free to read for everyone. To interact or ask questions you must have a subscription plan to enable all other features beyond reading. Please go over to the Subscription Page and pick out a plan that fits you best. At any time you wish to cancel the subscription please go back over to the Subscription Page and hit the Cancel button and your subscription will be stopped. All subscriptions are auto-renewing. 

Lift size question


Recommended Posts

2 hours ago, Mopar1973Man said:

Optimal final ratio should be 3.55 to 3.73. 

 

Example stock mine came with 265/75 R16 tires and 3.55 gears (31.6 inches). Now drop to a 245/75 R16 tire (30.5 inches) not changes the final ratio to 3.69:1 which I'm currently running. When figuring it out you need to start from the stock design typically 265/75 R16 tires.

Ive been reading through a few of your older posts that cover this issue. I found another more “in-depth calculator” where I was able to put in the 47re gears and see what rpm Is at what speed. http://Www.grimmjeeper.com/gears.html

So I’m looking at Falken A/T3W 285/70r17 which are exactly 33” in diameter. With 3.73 gears the final ratio is 2.57. 70mph = 1834 rpm. Does that sound about right? What is the ideal cruising rpm for long haul gas mileage?

Link to comment
Share on other sites

  • Owner
10 minutes ago, BennyGGG said:

So I’m looking at Falken A/T3W 285/70r17 which are exactly 33” in diameter. With 3.73 gears the final ratio is 2.57. 70mph = 1834 rpm. Does that sound about right?

 

 

Do you mean 3.57:1 ratio final?

 

3.69:1 final like myself I'm at 66 MPH is perfect 2,000 RPM and at 80 MPH is 2,450 RPM's I've documented several runs at 82 MPH still getting 21 MPG. Remember for every 1 pound of rotational weight you drop is like dropping 8 pounds off the frame. Consider the weight of the wheels and tires too. 

Link to comment
Share on other sites

2 minutes ago, Mopar1973Man said:

 

 

Do you mean 3.57:1 ratio final?

 

3.69:1 final like myself I'm at 66 MPH is perfect 2,000 RPM and at 80 MPH is 2,450 RPM's I've documented several runs at 82 MPH still getting 21 MPG. Remember for every 1 pound of rotational weight you drop is like dropping 8 pounds off the frame. Consider the weight of the wheels and tires too. 

Yes. According to this site 3.57:1 final ratio. If I go 4.10 ill be at 2.83 final ratio. 70mph at 2016rpm 

 

now that I’m looking at it I don’t think tire size is included in the final drive ratio Calculator 

Link to comment
Share on other sites

×
×
  • Create New...