Jump to content
  • Welcome To Mopar1973Man.Com

    We can see that your guest and been lurking about. When you register on the Mopar1973Man.Com site you'll be able to interact with all the other members. This is the most friendliest Cummins forum you'll ever join. Take the time right now and  REGISTER  on the Mopar1973Man.Com this will open up many more options and functions on the website. Everyone is very friendly and helpful just ask questions and everyone will help you out the best they can. 

Recommended Posts

Ok looking for some advice. 


Ok, so I bought a 99 dodge several months ago. The engine has been swapped out for an 02 engine and computer. The internal tone wheel had been retrofitted to the front of the balancer. 

For several months the truck had a p1690 code. I did all the checks on this page and everything checked out fine. 
 I finally got it to go away by rotating the tone wheel 180 degrees on the balancer and the code is no more. 


Worked good for about an hour, than I got a code for p0216 accompanied by the dead pedal. 

 

Truck has always had a lopey inconsistent miss at idle. Even after the p1690 code was fixed. 

 

I can Hotwire the pump and it idles great nice and smooth with no miss. 


 

Looking for a direction to go.

Share this post


Link to post
Share on other sites

Ok so for an update to make things even more difficult. I can unplug the crank sensor on the front of the engine and it idles a lot better and and the p0216 code goes away and gets replaced with p0336. 

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


×
×
  • Create New...