Jump to content
  • Welcome To Mopar1973Man.Com

    We can see that your guest and been lurking about. When you register on the Mopar1973Man.Com site you'll be able to interact with all the other members. This is the most friendliest Cummins forum you'll ever join. Take the time right now and  REGISTER  on the Mopar1973Man.Com this will open up many more options and functions on the website. Everyone is very friendly and helpful just ask questions and everyone will help you out the best they can. 

Unreal Summit

New injectors what's the best way to go?

Recommended Posts

I am pretty sure I am gonna buy from Ducky fuel injection. But I want to know should I get new injectors or reman?  I got what I think to be a stock trans and hy35 turbo.  I want either 50 hp or 75hp sticks.  Let me know what y'all think!

 

Thanks!

Share this post


Link to post
Share on other sites

I’ve never used ducky products but I’ve heard good things. I’d go with the 75 hp controlled fuel droppers, and always new. Tried a set of remans once and 3 ended up bad out of the box. 

Share this post


Link to post
Share on other sites
Posted (edited)

Also agree...

3 hours ago, wil440 said:

I'd be giving @dieselautopower a call. Vendor on here. 

 

I've done...

  • Stock Injectors - Failed at 150k miles at 260 to 270 bar. (Minimum pop is 293 bar by Dodge FSM standards)
  • RV275 Injectors (used) 
  • +50HP Vulcan Performance injectors.
  • +75 HP DAP injectors SAC and VCO injectors. (VCO performed better than SAC)
  • +150 HP DAP Injectors (7 x 0.010 @ 320 Bar) - CURRENT

So far I'm highly impressed with this set of injectors being I've upped the pop pressure, gain cleaner emissions (less smoke), good all around power and lower EGT's. Making roughly 500 HP with the Quadzilla on kill. Typically I drive with my economy tune and the Quadzilla on either 2 or 3 for level depending on what I want for the day. I cut it loose on level 7 on my Arizona trip and it towed wonderful. No EGT issues, low smoke and clears quickly. EGTs were controlled. Total GCW was 17,300 pounds.

 

Most injectors for our trucks are wore out by 100k miles and the pop pressure is too low. 

15915332979951430079351958718559.jpg

 

Edited by Mopar1973Man
  • Thanks 1

Share this post


Link to post
Share on other sites

I have to say Mike that is one big bumper pull, mine was smaller (a little)  truck is short bed and tail wagging the dog with no WDH, our roads here are not good for a bumper pull 

Share this post


Link to post
Share on other sites

What would a good pop pressure be for me?  I can't decide between 50 or 75 hp. I don't want to kill my egts. But I do have the quad.  I honestly need to look at DAP!

Share this post


Link to post
Share on other sites

Stock... Nozzles are too small really bump up pop pressure. Nozzle atomize the fuel pretty good. The larger injectors get larger droplets so bumping up a bit gives better fine mist. Im only +10 bar over the stock 310 bar.

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


×
×
  • Create New...