Jump to content
Mopar1973Man.Com LLC

  • Welcome To Mopar1973Man.Com LLC

    We are a privately owned support forum for the Dodge Ram Cummins Diesels. All information is free to read for everyone. To interact or ask questions you must have a subscription plan to enable all other features beyond reading. Please go over to the Subscription Page and pick out a plan that fits you best. At any time you wish to cancel the subscription please go back over to the Subscription Page and hit the Cancel button and your subscription will be stopped. All subscriptions are auto-renewing. 

Seal replacement steering box

dually
 Share

Recommended Posts

dually

dually

Posted
Posted

On my 01 3500.I removed the pitman arm.Then pull out the first seal,It is just pressed in by hand no tools needed.Then dig the next seal out with a small screw driver.Now remove the snapring.Now put the nut and washer back on.Start the truck put a oil catch pan under truck move the wheel back-n forth fast a few times.Shut off truck.The seal and washer will be forced out but will not drop to the ground because you put the nut back on.Now you have all the parts in order that came out.Grease up the new seals and shaft install new seals.

  • Like 1
Link to comment
Share on other sites
 Share
Go to topic listing
×
×
  • Create New...