Jump to content
Mopar1973Man.Com LLC

  • Welcome To Mopar1973Man.Com LLC

    We are a privately owned support forum for the Dodge Ram Cummins Diesels. All information is free to read for everyone. To interact or ask questions you must have a subscription plan to enable all other features beyond reading. Please go over to the Subscription Page and pick out a plan that fits you best. At any time you wish to cancel the subscription please go back over to the Subscription Page and hit the Cancel button and your subscription will be stopped. All subscriptions are auto-renewing. 

Interesting tid-bit on ring breakage

flagmanruss
 Share

Recommended Posts

flagmanruss

flagmanruss

Posted
Posted

This thread over on CDF Q asked what causes ring breakage? I'm not sure how true it is but one reply states that engine oil cools pistons but fuel lubes upper cylinder / rings. This is interesting in light of fuel lubricosity of ULSD vs ULSD + TCW3. I just wanted to bring this discussion to everyone's attention.

Link to comment
Share on other sites
  • Owner
Mopar1973Man

Mopar1973Man

Posted
  • Owner
Posted

Well I can speak for the older engines 12V and 24V engines... There shouldn't be any fuel fired till the piston is near TDC. This should fire the fuel into the bowl of the piston so technically there should be very little fuel to cylinder wall contact. Now as for the Common rail and it multi-firing events (pre and post) it really possible... So that does bring up a wear issue...

Link to comment
Share on other sites
 Share
Go to topic listing
×
×
  • Create New...