Jump to content

  • Welcome To Mopar1973Man.Com LLC

    We are a privately owned support forum for the Dodge Ram Cummins Diesels. All information is free to read for everyone. To interact or ask questions you must have a subscription plan to enable all other features beyond reading. Please go over to the Subscription Page and pick out a plan that fits you best. At any time you wish to cancel the subscription please go back over to the Subscription Page and hit the Cancel button and your subscription will be stopped. All subscriptions are auto-renewing. 

Hose and Push Lock fittings

ADawg

By ADawg,
in 3rd Generation Dodge

 Share

Recommended Posts

ADawg

ADawg

Posted
  • Author
Posted

My oil bypass mount is drilled/tapped into the frame, but my fuel filters are not. Dodge gives instructions on what is acceptable for drilling into the frame.

Do you know where I can find those specs? I think I am going to revamp my setup I am going to take a small sheet of metal and drill some holes and try that out. Cause I am having a hard time finding comparable hose without paying 4.00 a foot. post-11448-138698207823_thumb.jpg
Link to comment
Share on other sites
 Share
Go to topic listing

Rate The Author

Please take the time and give the author a 1 to a 5-star rating for the information you have gained from anywhere on the website. All forum threads, articles, etc. If a members post is good information please don't forget to tell them "Thanks" or "Like"

Rate Us On Google

Please take the time and visit our Google Review page and give us a review of our services.

Tip Jar

If Mopar1973Man.Com has helped you with quick and timely information for your repair please consider tossing a tip in the Tip Jar

×
×
  • Create New...