Jump to content
  • Welcome To Mopar1973Man.Com LLC

    We are a privately owned support forum for the Dodge Ram Cummins Diesels. All information is free to read for everyone. To interact or ask questions you must have a subscription plan to enable all other features beyond reading. Please go over to the Subscription Page and pick out a plan that fits you best. At any time you wish to cancel the subscription please go back over to the Subscription Page and hit the Cancel button and your subscription will be stopped. All subscriptions are auto-renewing. 

Anyone dyno with and without BHAF ?


Recommended Posts

  • Staff

Nope. During the time of hose clamp vs. turbo I asked around to a bunch of vendors about upgraded turbo with my exhaust brake. No one had a upgrade for me at the time nor any suggestion of turbo that would fit the Jacobs brake. :shrug: That's why I still have a stock turbo. Everyone suggested I ditch my exhaust brake then I could upgrade. But to keep it I have to keep the HX35W turbo.

I will have to do a little checking, I was fairly certain I had seen a turbo or two that use the OEM elbow, and thus the EB would work. I do believe the Garrett is one option.

Still not quite willing to believe it yet... (personally). So from -20*F to 110*F net me 24% loss. Well maybe seem a bit steep... Food for thought. Some of my basis of the warmer air idea. Also looking at ISX without a fan and warmer temp he creates. http://www.dieselpowermag.com/tech/general/0708dp_1997_dodge_ram_3500_dualie_cummins/viewall.html

I see it in aviation very easily, as well as in my truck. On a warm truck the load is noticeably higher in winter than summer, for the same weight and speed. EGT's aren't similar based on ambient temp, and even boost is effected, but load is pretty accurate.
Link to comment
Share on other sites

×
×
  • Create New...