Jump to content
  • Welcome To Mopar1973Man.Com LLC

    We are a privately owned support forum for the Dodge Ram Cummins Diesels. All information is free to read for everyone. To interact or ask questions you must have a subscription plan to enable all other features beyond reading. Please go over to the Subscription Page and pick out a plan that fits you best. At any time you wish to cancel the subscription please go back over to the Subscription Page and hit the Cancel button and your subscription will be stopped. All subscriptions are auto-renewing. 

Fuel 2-3 psi


AlCorr

Recommended Posts

  • Staff

Yes flow is more important than pressure to the CP3, hence the low pressure requirements. Too high of pressure can be hard on the FCA.

The factory filter cover starts to leak at about 30psi.

My truck runs great in the -20 to -30 range as well, not sure what that has to do with it? I run about 6-8 psi 90% of the time.

Saying it runs well out of spec is like saying 1600 hasn't melted a piston yet, so why go off of what is spec'd.

Not arguing, just putting the info out.

Link to comment
Share on other sites

  • 1 month later...
  • 1 month later...
×
×
  • Create New...