Jump to content
  • Welcome To Mopar1973Man.Com

    We can see that your guest and been lurking about. When you register on the Mopar1973Man.Com site you'll be able to interact with all the other members. This is the most friendliest Cummins forum you'll ever join. Take the time right now and  REGISTER  on the Mopar1973Man.Com this will open up many more options and functions on the website. Everyone is very friendly and helpful just ask questions and everyone will help you out the best they can. 

Recommended Posts

It appears to be leaking from where the shaft (not pitnam arm) connects to gearbox. Since the truck has a lot of wandering, I figured I'd just replace the whole thing.  Although I've found many reasonably price remanufactured ones, I've read that remanufactured boxes don't last long and some leak almost immediately. Any recommendations?  This truck doesn't get driven much (4K in the last year and a half).

Link to post
Share on other sites

If you still have the wandering issue after replacing the gearbox check out the Ram Rock Solid Column bushing. It's about 60.00, easy to install, and takes quite a bit of play out of the steering. Also, I put a reman gearbox on mine not long ago and I made some adjustments on mine right off the bat. When I put it on it still felt sloppy so I adjusted it 1/4 turn at a time until I got it where I wanted it. This of course after I had checked the play in ball joints, tie rod ends, etc.

Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Create New...