Jump to content

  • Intake Temperature & Pressure Sensor

       (0 reviews)
    Mopar1973Man

    By Mopar1973Man

     Share

    INTAKE TEMPERATURE & PRESSURE SENSOR

     

    OPERATION
    The Inlet Air Temperature/Pressure Sensor is a combination dual-function sensor. The sensor element extends into the intake air stream at the top of the air filter housing. Ambient air temperature, as well as barometric pressure, is monitored by this sensor. The Engine Control Module (ECM) monitors signals from this sensor.

     

    REMOVAL
    The Inlet Air Temperature/Pressure Sensor (3) is located on the air cleaner cover.
    1. Disconnect electrical connector (7) at sensor.
    2. Remove mounting screw (2).
    3. Remove sensor from air cleaner cover.
    4. Check condition of sensor a-ring.

     

    INSTALLATION
    1. Check condition of sensor a-ring.
    2. Position sensor (3) into top of air cleaner cover with a slight twisting action.
    3. Install mounting screw (2).
    4. Install electrical connector (7).

     

    4th-gen-maf.jpg

     

     

     

     Share
    Go to Cummins articles

    User Feedback

    There are no reviews to display.


Rate The Author

Please take the time and give the author a 1 to a 5-star rating for the information you have gained from anywhere on the website. All forum threads, articles, etc. If a members post is good information please don't forget to tell them "Thanks" or "Like"

Rate Us On Google

Please take the time and visit our Google Review page and give us a review of our services.

Tip Jar

If Mopar1973Man.Com has helped you with quick and timely information for your repair please consider tossing a tip in the Tip Jar

×
×
  • Create New...