Jump to content

  • P0252 Fuel Valve Signal Missing

       (0 reviews)
    Mopar1973Man

    By Mopar1973Man

     Share

    DTC P0252: FUEL VALVE SIGNAL MISSING

    Monitor & Set Conditions

    Fuel injection pump fuel valve circuit is monitored after current feedback monitoring is complete and average engine speed is greater than 700 RPM. DTC may be stored when Engine Control Module (ECM) does not receive a signal from the solenoid valve to indicate valve movement.

    Possible Causes

    Fuel Injection Pump

    Testing

    Turn ignition on. Using DRBIII(R) scan tool, erase any ECM DTCs. Test drive vehicle. Using scan tool, recheck for ECM DTCs. If DTC P0252 resets, replace fuel injection pump. See appropriate REMOVAL, OVERHAUL & INSTALLATION article. If DTC P0252 does not reset, test is complete.

     Share
    Go to Cummins articles

    User Feedback

    There are no reviews to display.


Rate The Author

Please take the time and give the author a 1 to a 5-star rating for the information you have gained from anywhere on the website. All forum threads, articles, etc. If a members post is good information please don't forget to tell them "Thanks" or "Like"

Rate Us On Google

Please take the time and visit our Google Review page and give us a review of our services.

Tip Jar

If Mopar1973Man.Com has helped you with quick and timely information for your repair please consider tossing a tip in the Tip Jar

×
×
  • Create New...