Jump to content

  • P0254 VP44 Fuel Valve Current Too High

       (0 reviews)
    Mopar1973Man

    By Mopar1973Man

     Share

    DTC P0254: FUEL INJECTION PUMP FUEL VALVE CURRENT TOO HIGH

    1. Turn ignition on with engine off. Using scan tool, check for DTCs. If DTC P0254: FUEL INJECTION PUMP FUEL VALVE CURRENT TOO HIGH does not exist, go to next step. If DTC P0254: FUEL INJECTION PUMP FUEL VALVE CURRENT TOO HIGH exists, replace fuel injection pump. Perform TEST VER-2A .

    2. Turn ignition on with engine off. Using scan tool, clear DTCs. Start engine and allow engine to idle for one minute. Using scan tool, check for DTCs. If DTC P0254: FUEL INJECTION PUMP FUEL VALVE CURRENT TOO HIGH does not exist, test is complete. If DTC P0254: FUEL INJECTION PUMP FUEL VALVE CURRENT TOO HIGH exists, replace fuel injection pump. Perform TEST VER-2A .

     Share
    Go to Cummins articles

    User Feedback

    There are no reviews to display.


Rate The Author

Please take the time and give the author a 1 to a 5-star rating for the information you have gained from anywhere on the website. All forum threads, articles, etc. If a members post is good information please don't forget to tell them "Thanks" or "Like"

Rate Us On Google

Please take the time and visit our Google Review page and give us a review of our services.

Tip Jar

If Mopar1973Man.Com has helped you with quick and timely information for your repair please consider tossing a tip in the Tip Jar

×
×
  • Create New...