Jump to content

  • P0606 ECM Failure

       (0 reviews)
    Mopar1973Man

    By Mopar1973Man

     Share

    DTC P0606: ECM FAILURE

    Monitor & Set Conditions

    ECM is monitored for internal failure with ignition on engine off, and with engine running. DTC may be set when an internal ECM error is detected.

    Possible Causes

    • ECM

    Testing

    Turn ignition on with engine off. Using DRBIII(R) scan tool, check for DTCs. If Good Trip Counter for DTC P0606 is displayed and equal to zero, replace and program ECM. See appropriate REMOVAL, OVERHAUL & INSTALLATION article. ECM is located on driver's side of engine, just in front of fuel transfer pump and contains a 50-pin connector. If Good Trip Counter for DTC P0606 is displayed and not equal to zero, test is complete.

     Share
    Go to Cummins articles

    User Feedback

    There are no reviews to display.


Rate The Author

Please take the time and give the author a 1 to a 5-star rating for the information you have gained from anywhere on the website. All forum threads, articles, etc. If a members post is good information please don't forget to tell them "Thanks" or "Like"

Rate Us On Google

Please take the time and visit our Google Review page and give us a review of our services.

Tip Jar

If Mopar1973Man.Com has helped you with quick and timely information for your repair please consider tossing a tip in the Tip Jar

×
×
  • Create New...