Jump to content

  • P1284 Fuel Injection Pump Battery Volt Out Of Range

       (0 reviews)
    Mopar1973Man

    By Mopar1973Man

     Share

    DTC P1284: FUEL INJECTOR PUMP BATTERY VOLT OUT-OF-RANGE

    1. Turn ignition on with engine off. Using scan tool, check for DTCs. If DTC SPECIFIC GOOD TRIP counter is not displayed and equal to zero, go to next step. If DTC SPECIFIC GOOD TRIP counter is displayed and equal to zero, replace fuel injection pump. Perform TEST VER-5A .

    2. At this time, conditions required for DTC to be stored are not present. Ensure ignition is on with engine off. Using scan tool, read and record FREEZE FRAME data. Road test vehicle under conditions displayed in FREEZE FRAME data parameters while noting DTC SPECIFIC GOOD TRIP COUNTER. If DTC SPECIFIC GOOD TRIP counter does not change to zero, test is complete. If DTC SPECIFIC GOOD TRIP counter changes to zero, replace fuel injection pump. Perform TEST VER-5A .

     Share
    Go to Cummins articles

    User Feedback

    There are no reviews to display.


Rate The Author

Please take the time and give the author a 1 to a 5-star rating for the information you have gained from anywhere on the website. All forum threads, articles, etc. If a members post is good information please don't forget to tell them "Thanks" or "Like"

Rate Us On Google

Please take the time and visit our Google Review page and give us a review of our services.

Tip Jar

If Mopar1973Man.Com has helped you with quick and timely information for your repair please consider tossing a tip in the Tip Jar

×
×
  • Create New...