Jump to content
  • P0106 Inlet Air Pressure Sensor Rationality

       (0 reviews)

    Mopar1973Man

    P0106 INLET AIR PRESSURE SENSOR RATIONALITY

    When Monitored and Set Condition:

    When Monitored: When the ignition is on.
    Set Condition: The Inlet air pressure is above a calibrated threshold.

    POSSIBLE CAUSES

    • INLET AIR PRESSURE SENSOR
    • INTERMITTENT CONDITION
    • TROUBLESHOOT OTHER DTC'S FIRST

    DIAGNOSTIC PROCEDURE

    NOTE: Refer to VERIFICATION TESTS for appropriate verification test procedures.Using the DRBIII®, check for additional DTC's.

    1. Do you have any other air pressure related DTC's?
      Yes --> Troubleshoot other DTC's First. Perform POWERTRAIN VERIFICATION TEST VER - 1 (DIESEL).
      No --> Go To 2
    2. Using the DRBIII®, monitor the Inlet air pressure sensor values. Do the readings on the DRBIII® fluctuate slightly?
      Yes --> Refer to the SYMPTOM: INTERMITTENT CONDITION Symptom (Diagnostic Procedure). Perform POWERTRAIN VERIFICATION TEST VER - 1 (DIESEL).
      No --> Replace the Inlet Air Temperature/ Pressure sensor. Perform POWERTRAIN VERIFICATION TEST VER - 1 (DIESEL).

    User Feedback

    There are no reviews to display.


×
×
  • Create New...

Advertisements and Ad Blockers

Mopar1973Man.Com uses the income from advertisers to pay the bills on the website. Please whitelist your ad blockers for Mopar1973Man.Com this will allow advertisements to display on our pages but allows you to still block ads on the other websites you visit. 

 

image.png

I will whitelist Mopar1973Man.Com