Jump to content

  • P0234 Turbo Boost Limit Exceeded

       (0 reviews)
    Mopar1973Man

    By Mopar1973Man

     Share

    P0234 TURBO BOOST LIMIT EXCEEDED

    When Monitored and Set Condition:

    When Monitored: While running.
    Set Condition: The intake air pressure is above a calibrated value for a calibrated amount of time.

    POSSIBLE CAUSES

    • OTHER DTC'S
    • WASTEGATE STUCK

    DIAGNOSTIC PROCEDURE

    NOTE: Refer to VERIFICATION TESTS for appropriate verification test procedures.

    1. Turn the ignition on. With the DRBIII®, read the Engine DTC's. Do you have additional Boost Pressure related faults?
      Yes --> Repair other boost related DTC's first.
      No --> Go To 2
    2. Turn the ignition on. With the DRBIII®, go to the Freeze Frame screen record all data. With the DRBIII®, read DTCs. Operate the vehicle in the Freeze Frame parameters. Did the DTC P-0234 return?
      Yes --> Replace the Wastegate.
      No --> Test Complete.
     Share
    Go to Cummins articles

    User Feedback

    There are no reviews to display.


Rate The Author

Please take the time and give the author a 1 to a 5-star rating for the information you have gained from anywhere on the website. All forum threads, articles, etc. If a members post is good information please don't forget to tell them "Thanks" or "Like"

Rate Us On Google

Please take the time and visit our Google Review page and give us a review of our services.

Tip Jar

If Mopar1973Man.Com has helped you with quick and timely information for your repair please consider tossing a tip in the Tip Jar

×
×
  • Create New...