Jump to content

Welcome To Mopar1973Man.Com LLC

We are privately owned, with access to a professional Diesel Mechanic, who can provide additional support for Dodge Ram Cummins Diesel vehicles. Many detailed information is FREE and available to read. However, in order to interact directly with our Diesel Mechanic, Michael, by phone, via zoom, or as the web-based option, Subscription Plans are offered that will enable these and other features.  Go to the Subscription Page and Select a desired plan. At any time you wish to cancel the Subscription, click Subscription Page, select the 'Cancel' button, and it will be canceled. For your convenience, all subscriptions are on auto-renewal.

Airdog help

Posted

Hello, I have a AIRDOG 100 on my truck. Along with a glow shift fuel pressure gauge. I recently washed my engine bay and had a water in fuel light. It went off after a couple miles of driving. And was told to drain my water filter so I did. And bumped the key to prime and pump and it did. But now my gauge doesn't ever move. And I can't ever hear the airdog run. Even when I bump the key. Anything I can do?!? Just runs fine!!

  • Replies 27
  • Views 4.2k
  • Created
  • Last Reply

Top Posters In This Topic

Popular Days

Posted Images

Featured Replies

Well.$240 later

If it came with a warranty card, get it in! If it came with instructions, read ALL of it FIRST, then start at step 1. Be very careful with any bolts or fittings. I've had one break on me before and I was lucky to get it extracted. The base plate is an expensive replacement, too!
  • Author

If it came with a warranty card, get it in! If it came with instructions, read ALL of it FIRST, then start at step 1. Be very careful with any bolts or fittings. I've had one break on me before and I was lucky to get it extracted. The base plate is an expensive replacement, too!

Already filled it out and have it ready for the mail in the morning! And I've taken in off before. But will read the instructions this time!
  • Author

Got it on. Truck still running fine. Need a new fuel pressure sensor so my gauge will stop walking

Good deal! Also, make sure to put a needle valve t'ed inline so you don't cause any damage to your gauge from the water hammer affect the vp44 produces.

  • Author

Good deal! Also, make sure to put a needle valve t'ed inline so you don't cause any damage to your gauge from the water hammer affect the vp44 produces.

Thank you! Where would I get one and how would I install it? I'm running a glow shift FP gauge.
Go to topic listing

Did This Forum Post Help You?

Show the author some love by liking their post!

Welcome To Mopar1973Man.Com LLC

We are privately owned, with access to a professional Diesel Mechanic, who can provide additional support for Dodge Ram Cummins Diesel vehicles. Many detailed information is FREE and available to read. However, in order to interact directly with our Diesel Mechanic, Michael, by phone, via zoom, or as the web-based option, Subscription Plans are offered that will enable these and other features.  Go to the Subscription Page and Select a desired plan. At any time you wish to cancel the Subscription, click Subscription Page, select the 'Cancel' button, and it will be canceled. For your convenience, all subscriptions are on auto-renewal.