Jump to content
Mopar1973Man.Com LLC

  • Welcome To Mopar1973Man.Com LLC

    We are a privately owned support forum for the Dodge Ram Cummins Diesels. All information is free to read for everyone. To interact or ask questions you must have a subscription plan to enable all other features beyond reading. Please go over to the Subscription Page and pick out a plan that fits you best. At any time you wish to cancel the subscription please go back over to the Subscription Page and hit the Cancel button and your subscription will be stopped. All subscriptions are auto-renewing. 

Break Rotor Hub Swap

kerley
 Share

Recommended Posts

kerley

kerley

Posted
Posted

My 1998 Dodge/Cummins has front disc breaks. The disc/hub appears to be one piece. What year did Dodge modify the hub and rotor so they were seprate, and would the change also fit the 98'. Thank you, Kerley

dracozny

dracozny

Posted
Posted

My 1998 Dodge/Cummins has front disc breaks. The disc/hub appears to be one piece. What year did Dodge modify the hub and rotor so they were seprate, and would the change also fit the 98'. Thank you, Kerley

2000, and no they will not mate up . if you want to do the swap you will have to swap the entire axle. and just for kicks.... if you want to do the rears there is a very expensive kit to do a disk conversion I think it runs about $900 or again swap the axle and a few other parts. Ive been tempted to do this myself. perhaps when i got more cash laying around....
kerley

kerley

Posted
  • Author
Posted

Well I guess that problem is solved. I will just have to keep what I have and be happy with it.Thanks, Kerley

 Share
Go to topic listing
×
×
  • Create New...