Jump to content
View in the app

A better way to browse. Learn more.
Mopar1973Man.Com LLC

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

P0168 High Injection Pump Fuel Temperature

(0 reviews)

By Mopar1973Man

· 3,574 views

DTC P0168: HIGH INJECTION PUMP FUEL TEMP

Monitor & Set Conditions

Engine performance is monitored with the engine running. DTC will set if fuel temperature sensor signal indicates fuel temperature has exceeded the engine protection and/or pump protection limit.

Possible Causes

  • Overflow Valve
  • Fuel Injection Pump Module

Testing

1. Test operation of overflow valve located on the fuel injection pump. See OVERFLOW VALVE under FUEL SYSTEMS in SYSTEM & COMPONENT TESTING - RAM PICKUP - DIESEL article. If overflow valve operates properly, go to next step. If overflow valve is defective, replace overflow valve. See appropriate REMOVAL, OVERHAUL & INSTALLATION article.

2. At this time, Fuel Pump Control Module (FPCM) is assumed to be defective and must be replaced. FPCM is incorporated into fuel injection pump and is non-serviceable. Replace fuel injection pump. See appropriate REMOVAL, OVERHAUL & INSTALLATION article.

    • User Feedback

    There are no reviews to display.

    Configure browser push notifications
    Chrome (Android)
    1. Tap the lock icon next to the address bar.
    2. Tap Permissions → Notifications.
    3. Adjust your preference.
    Chrome (Desktop)
    1. Click the padlock icon in the address bar.
    2. Select Site settings.
    3. Find Notifications and adjust your preference.