Jump to content
View in the app

A better way to browse. Learn more.
Mopar1973Man.Com LLC

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

P0572 Brake Switch Input #1 Signal Missing

(0 reviews)

By Mopar1973Man

· 2,080 views

DTC P0572: BRAKE SWITCH INPUT #1 SIGNAL MISSING

Monitor & Set Conditions

Brake switch input No. 1 signal is monitored with ignition on engine off, and with engine running. DTC may set if Engine Control Module (ECM) sees brake switch OFF and PCM sees brake switch ON for 3 seconds. Condition must be met 10 times for DTC to set.

Possible Causes

  • Wire From Brake Switch To ECM Missing

Testing

Repair open brake switch input wire or replace brake switch.

    • User Feedback

    There are no reviews to display.

    Configure browser push notifications
    Chrome (Android)
    1. Tap the lock icon next to the address bar.
    2. Tap Permissions → Notifications.
    3. Adjust your preference.
    Chrome (Desktop)
    1. Click the padlock icon in the address bar.
    2. Select Site settings.
    3. Find Notifications and adjust your preference.