Jump to content

Welcome To Mopar1973Man.Com LLC

We are privately owned, with access to a professional Diesel Mechanic, who can provide additional support for Dodge Ram Cummins Diesel vehicles. Many detailed information is FREE and available to read. However, in order to interact directly with our Diesel Mechanic, Michael, by phone, via zoom, or as the web-based option, Subscription Plans are offered that will enable these and other features.  Go to the Subscription Page and Select a desired plan. At any time you wish to cancel the Subscription, click Subscription Page, select the 'Cancel' button, and it will be canceled. For your convenience, all subscriptions are on auto-renewal.

P0602 ECM Fueling Calibration

(0 reviews)
Mopar1973Man

By Mopar1973Man

DTC P0602: ECM FUELING CALIBRATION

Monitor & Set Conditions

Engine Control Module (ECM) fueling calibration error is monitored when ignition is on. DTC may be stored if any parameter is out of range for one second.

Possible Causes

  • Good Trip Counter Equals Zero
  • ECM

Testing

1. Turn ignition on with engine off. Using DRBIII(R) scan tool, check for DTCs. If Good Trip Counter for DTC P0602 is displayed and equal to zero, go to next step. If Good Trip Counter for DTC P0602 is displayed and not equal to zero, DTC is not present at this time. Using scan tool, clear DTCs. Test is complete.

2. At this time, conditions required for DTC to be stored are not present. Ensure ignition is on with engine off. Using scan tool, read and record FREEZE FRAME data. Road test vehicle under conditions displayed in FREEZE FRAME data parameters. Check for pertinent technical service bulletins that apply to vehicle. Update ECM calibration using required equipment. If ECM calibration is updated before reading FREEZE FRAME data, the FREEZE FRAME data will be erased. Using scan tool, check for DTCs. If DTC P0602 does not return, test is complete. If DTC P0602 returns, replace and program ECM. See appropriate REMOVAL, OVERHAUL & INSTALLATION article. ECM is located on driver's side of engine, just in front of fuel transfer pump and contains a 50-pin connector.

    • User Feedback

    There are no reviews to display.