Jump to content
  • P0606 ECM Hardware Error

       (0 reviews)

    P0606 ECM HARDWARE ERROR

    When Monitored and Set Condition:

    When Monitored: With the key on or engine running.
    Set Condition: ECM had detected internal failures.

    POSSIBLE CAUSES

    • ECM

    DIAGNOSTIC PROCEDURE

    1. Turn the ignition on.
      NOTE: This DTC is caused by an internal Engine Control Module failure. Repairs are not possible to the ECM.
      With the DRBIII®, erase DTCs. Is the DTC still set?
      Yes --> Replace and program the ECM in accordance with the Service Information. Perform POWERTRAIN VERIFICATION TEST VER - 1 (DIESEL).
      No --> Test Complete.

    User Feedback

    Join the conversation

    You can post now and register later. If you have an account, sign in now to post with your account.
    Note: Your post will require moderator approval before it will be visible.

    Guest

×
×
  • Create New...