Jump to content

Welcome To Mopar1973Man.Com LLC

We are privately owned, with access to a professional Diesel Mechanic, who can provide additional support for Dodge Ram Cummins Diesel vehicles. Many detailed information is FREE and available to read. However, in order to interact directly with our Diesel Mechanic, Michael, by phone, via zoom, or as the web-based option, Subscription Plans are offered that will enable these and other features.  Go to the Subscription Page and Select a desired plan. At any time you wish to cancel the Subscription, click Subscription Page, select the 'Cancel' button, and it will be canceled. For your convenience, all subscriptions are on auto-renewal.

P0111 Intake Air Temperature (IAT) Sensor Rationality

(0 reviews)
Mopar1973Man

By Mopar1973Man

P0111 INTAKE AIR TEMPERATURE (IAT) SENSOR RATIONALITY

When Monitored and Set Condition:

When Monitored: While the engine is running.
Set Condition: The ECM does not read a change in value from the sensor over time.

POSSIBLE CAUSES

  • FAILED IAT SENSOR
  • INTERMITTENT CONDITION

DIAGNOSTIC PROCEDURE

NOTE: Refer to VERIFICATION TESTS for appropriate verification test procedures.

  1. Remove the temperature sensor and reconnect the wiring to the sensor. Monitor DRBIII®, while heating the sensor with an external heat source (DO NOT USE OPEN FLAME). Does the reading from the sensor increase at least 5 degrees F. on the DRB?
    Yes --> Refer to the SYMPTOM: INTERMITTENT CONDITION Symptom (Diagnostic Procedure). Perform POWERTRAIN VERIFICATION TEST VER - 1 (DIESEL).
    No --> Replace the Intake air temp sensor/MAP sensor. Perform POWERTRAIN VERIFICATION TEST VER - 1 (DIESEL).

    • User Feedback

    There are no reviews to display.