P0607 ECM Internal Failure

P0607 ECM INTERNAL FAILURE

When Monitored and Set Condition:

When Monitored: With the key on or engine running
Set Condition: ECM had detected internal failures.

POSSIBLE CAUSES

• ECM

DIAGNOSTIC PROCEDURE

1. Turn the ignition on.
   NOTE: This DTC is caused by an internal Engine Control Module failure. Repairs are not possible to the ECM.
   Is the DTC P0606 set?
   Yes --> Replace and program the ECM in accordance with the Service Information. Perform POWERTRAIN VERIFICATION TEST VER - 1 (DIESEL).
   No --> Test Complete.