Jump to content

Welcome To Mopar1973Man.Com LLC

We are privately owned, with access to a professional Diesel Mechanic, who can provide additional support for Dodge Ram Cummins Diesel vehicles. Many detailed information is FREE and available to read. However, in order to interact directly with our Diesel Mechanic, Michael, by phone, via zoom, or as the web-based option, Subscription Plans are offered that will enable these and other features.  Go to the Subscription Page and Select a desired plan. At any time you wish to cancel the Subscription, click Subscription Page, select the 'Cancel' button, and it will be canceled. For your convenience, all subscriptions are on auto-renewal.

Air & Exhaust

Everything pretaining to air and exhaust systems. This includes air filters, turbos, intercoolers, manifolds, etc.

2 Cummins articles in this category

  1. Me78569 ·
    article will show you how to calibrate a HE300VE turbo using a cheap arduino board and a Canbus shield.   PLEASE NOTE****  This is not a magic pill for fixing issues with the turbo actuator.  If the actuator is bad then it will still need to be replaced.  We get a lof of questions similar to "hey I ran this and the turbo still doesn't work"    This will not fix an actuator, only calibrate a good actuator to the physical limits of the turbo vanes.   Parts arduino uno $15-
    Me78569
    • 0 comments
    • 26,553 views
  2. Me78569 ·
    Tools- 5/16 socket, extension, ratchet, etc, to remove bolts and possibly clamps 1/4" nut driver, to possibly remove clamps flat blade screw driver, cause you always need one for something snap blade utility knife, to cut the filer element sharp chisel, 1/2" or so, to remove the glue Dremel with cut off wheel, cause it works a whole lot better than a hack saw So I guess the idea here is to protect this and everything after it from oil build up and crap. Also, I guess
    Me78569
    • 0 comments
    • 4,339 views