For Sale - 2006 Dodge Ram 2500- Flatbed for long box bed Winch bumper Flat Bed for Long Box 3rd generation Cummins Tootlbox are included with key I have a flatbed for 3rd Generation dodge Cummins. This flatbed comes with a gooseneck hitch already in the bed. The winch bumper is part of the set. Tootlbox have a key to lock and unlock all box a single key. There is rust starting and electrical will have to be sorted out on your own.
-
Price: $1,000.00
-
Location: New Meadows, Idaho
I’m still running down some issues with my truck. It will start and run but I dont have any charging, no a/c clutch, and no O/D. Everything works when bypassed. No voltage from the pcm on the blue wire from the pcm to the trans relay and alternator. Checked CCD bus with a meter and have 2.4 - 2.5v on the network. Unplugged all modules except pcm, ecm, and ipc. Still no signal. Checked cam sensor and the bolt was missing but I replaced the sensor anyway. Checked and cleaned all grounds. Instrument cluster and overhead console are working so I don’t think the ccd is the issue. I’m wondering if it’s possible to have a bad crank sensor even though the engine starts and runs. Previously I had an occasional no start issue and a dead pedal issue and I replaced the Crank sensor and APPS and the issues were resolved. Could I have an issue with the Napa crank sensor? I’m furloughed right now and don’t have access to my scan tool or scope and I’m struggling to fix this truck.
Edited by Sugmadique