Welcome To Mopar1973Man.Com LLC
We are privately owned, with access to a professional Diesel Mechanic, who can provide additional support for Dodge Ram Cummins Diesel vehicles. Many detailed information is FREE and available to read. However, in order to interact directly with our Diesel Mechanic, Michael, by phone, via zoom, or as the web-based option, Subscription Plans are offered that will enable these and other features. Go to the Subscription Page and Select a desired plan. At any time you wish to cancel the Subscription, click Subscription Page, select the 'Cancel' button, and it will be canceled. For your convenience, all subscriptions are on auto-renewal.
- Views 940
- Created
- Last Reply
Featured Replies
Did This Forum Post Help You?
Show the author some love by liking their post!
Welcome To Mopar1973Man.Com LLC
We are privately owned, with access to a professional Diesel Mechanic, who can provide additional support for Dodge Ram Cummins Diesel vehicles. Many detailed information is FREE and available to read. However, in order to interact directly with our Diesel Mechanic, Michael, by phone, via zoom, or as the web-based option, Subscription Plans are offered that will enable these and other features. Go to the Subscription Page and Select a desired plan. At any time you wish to cancel the Subscription, click Subscription Page, select the 'Cancel' button, and it will be canceled. For your convenience, all subscriptions are on auto-renewal.
Looking to replace control arms on a couple old 2nd gens. I am curious to know what experiences you guys have had with different aftermarket control arms? Good / bad or any advice you think a guy should know while searching. The trucks are staying stock so no lifts no big tires still daily driven work trucks. My thinking is if i am going to replace them i might as well get something better then stock. Also one of the trucks the excentric hole is wallowed out a bit from being run lose at some point. Its probably not the best to expect it to adjust correctly anymore. That one is mostly why i think i could get away with adjustable control arms. Otherwise non adjustable ones would work for the other truck that don't have that problem.