Welcome To Mopar1973Man.Com LLC
We are privately owned, with access to a professional Diesel Mechanic, who can provide additional support for Dodge Ram Cummins Diesel vehicles. Many detailed information is FREE and available to read. However, in order to interact directly with our Diesel Mechanic, Michael, by phone, via zoom, or as the web-based option, Subscription Plans are offered that will enable these and other features. Go to the Subscription Page and Select a desired plan. At any time you wish to cancel the Subscription, click Subscription Page, select the 'Cancel' button, and it will be canceled. For your convenience, all subscriptions are on auto-renewal.
- Views 356
- Created
- Last Reply
Featured Replies
Archived
This topic is now archived and is closed to further replies.
Did This Forum Post Help You?
Show the author some love by liking their post!
Welcome To Mopar1973Man.Com LLC
We are privately owned, with access to a professional Diesel Mechanic, who can provide additional support for Dodge Ram Cummins Diesel vehicles. Many detailed information is FREE and available to read. However, in order to interact directly with our Diesel Mechanic, Michael, by phone, via zoom, or as the web-based option, Subscription Plans are offered that will enable these and other features. Go to the Subscription Page and Select a desired plan. At any time you wish to cancel the Subscription, click Subscription Page, select the 'Cancel' button, and it will be canceled. For your convenience, all subscriptions are on auto-renewal.
I have an xzillarator model DXZ01s that has had the map sensors cut off and im trying to figure out how to wire the new plugs i ordered for it. The harness has 2 wires coming out of it and im trying to find out how to wire the male and female map sensor plug. I bought an ls tps extension plug and it has the male and female plugs that i need wired to each other so ill cut that in half and have three wires coming out of each plug i know one wire is a jumper but i need to figure out which one will be the jumper and then what to do with the rest of the 4 wires