Pristine CTD. Extra cab, short bed, 2wd, SLT. Factory tow/haul package, leather heated seats, heavy insulation package. Rebuilt HX 35/40, Dap injectors, full gauges, PacBrake, Dynamic Transmission vb/servos/accumulator/strut/band/triple disc. Soft tranny lines, 40k trans cooler, lift pump, gooseneck hitch (never used), class 5 tow hitch, tonneau cover, air bags, re- geared to 3.73’s, 3rd Gen brakes with 17" rims Rust free CA truck located in Chico CA, 100 miles north of Sacto. I built this to
-
Price: 16000
-
Location: Chico CA 95973
I have tried a few different 0-100PSI fuel pressure sensors and they all seem to read low (including the official fuel pressure sensor from Quad). Is there a calibration or offset for the fuel pressure sensor values (or could we get one as an enhancement request?)
My edge was reading around 20PSI at idle after the fuel filter, a mechanical gauge is within a couple psi of that value, but I can't seem to find a 0-100psi sensor read from the Quad that reads higher than 10psi. Maybe my luck is bad (3 different 0-100psi sensors all disagreeing with the mechanical gauge, and each other).