Pristine CTD. Extra cab, short bed, 2wd, SLT. Factory tow/haul package, leather heated seats, heavy insulation package. Rebuilt HX 35/40, Dap injectors, full gauges, PacBrake, Dynamic Transmission vb/servos/accumulator/strut/band/triple disc. Soft tranny lines, 40k trans cooler, lift pump, gooseneck hitch (never used), class 5 tow hitch, tonneau cover, air bags, re- geared to 3.73’s, 3rd Gen brakes with 17" rims Rust free CA truck located in Chico CA, 100 miles north of Sacto. I built this to
-
Price: 16000
-
Location: Chico CA 95973
This should work from 1994-1997, not sure about 1998, probably close enough for that one. Basically I needed to trace out every single PCM wire and after 2 hours I got it all written down. If there is a "/", that means it splices into something else as well, hopefully the things that say a/c doesn't throw anyone off
.
The PCM has 3 big connectors, I am calling them A, B, and C, just like the schematic does. I haven't went out and looked to see which is which but they are color coded (White/Grey/Black).
On a more subtle note, if you want to know how your truck is really wired, trace each one yourself
I might make a few more of these. It's kinda nice knowing how many or what wires go into the PCM or PDC (power distribution box(the black one on the drivers side fender)) without having to trace them out for an hour.
The numbers (PCM-A1 or the like) all correlate with the master wiring diagram which can be downloaded here.
1997 PCM Wiring.pdf
1997 PDC Wiring.pdf