Pristine CTD. Extra cab, short bed, 2wd, SLT. Factory tow/haul package, leather heated seats, heavy insulation package. Rebuilt HX 35/40, Dap injectors, full gauges, PacBrake, Dynamic Transmission vb/servos/accumulator/strut/band/triple disc. Soft tranny lines, 40k trans cooler, lift pump, gooseneck hitch (never used), class 5 tow hitch, tonneau cover, air bags, re- geared to 3.73’s, 3rd Gen brakes with 17" rims Rust free CA truck located in Chico CA, 100 miles north of Sacto. I built this to
-
Price: 16000
-
Location: Chico CA 95973
Just done the crankcase vent mod w/some mods of my own. I liked the pictures of the mod but I did it a little different than what I saw. The pics. I saw showed the mod without the radiator hose which will rub against the pvc pipe when it is connected. Over time you will get a problem. If you take the 3/4" curved hose that is already on the vent to the canister you will see you can cut it to be a perfect fit to go around the radiator hose by cutting the curved part off. Put a short piece of 1/2" pvc into the hose, CLAMP IT and Attatch the 90% pvc then cut and fit the pvc to meet your needs. At the end , instead of using more pvc AS A DOWN PIPE I simply put a 3 ft. piece of 3/4" heater hose and ran it out the bottom with A ZIP TIE. Simple, works perfect, looks good. Painted it black.