Couple questions about a rear axle swap. I have a line on a 3.54 ratio complete assembly from a '98 2500. My truck ('99 3500 DRW) is fitted with a Dana 80.1) Does a '98 2500 diesel use a Dana 80?2) Are there differences between axles used in SRW and DRW applications?3) Are there any differences between the rear axles on a rear wheel only ABS truck & all wheel ABS truck (mine is the latter)?4) Are U joints the same between the two?5) Any challenges with attaching to the springs?I'm aware of the speedo cal issue. Anything else I'm not considering?Appreciate the help,Joe in St Louis
Couple questions about a rear axle swap. I have a line on a 3.54 ratio complete assembly from a '98 2500. My truck ('99 3500 DRW) is fitted with a Dana 80.1) Does a '98 2500 diesel use a Dana 80?2) Are there differences between axles used in SRW and DRW applications?3) Are there any differences between the rear axles on a rear wheel only ABS truck & all wheel ABS truck (mine is the latter)?4) Are U joints the same between the two?5) Any challenges with attaching to the springs?I'm aware of the speedo cal issue. Anything else I'm not considering?Appreciate the help,Joe in St Louis